Solar Energy Charging Intelligent Garden Automatic Watering Device Set Flower Sprinkler Drip Irrigation Watering Tool Kits Water Timer System

Description:
The intelligent solar energy automatic watering device is designed to be set up 80 times per day (weekly), adjustable every 1-99 seconds, and then cycled. 
Built-in lithium battery, after the battery is fully charged, it can pump about 60 liters of water. It is equipped with a charger, which can be plugged in and charged automatically. 

Specification:
Color: White
Plug: US Plug ( We will send the relevant plug according to your country)
Battery Type: Built-in 18650 Lithium Battery
Battery Voltage: 8.4V
Watering Device Power: 6W
Size: 105mm x 130mm
Charging Method: Solar Energy Charging, USB Charging
Package Included: As Picture Shown 
 
Features:
1. Automatic watering system with pump and timer in one plant watering system.
2. Including kits for a whole drip irrigating system, meeting your different demands.
3. Portable and easy to assemble, Eco-friendly and practical.
4. It is equipped with built-in lithium battery, which can pump about 60 liters of water when fully charged.
5. It is also equipped with a charger, which can be plugged in and charged automatically under the sun.
6. Solar energy storage is environmentally friendly and clean as well as economical.

Timing button instructions:

1. Set the Beijing time: hold the "clock", and then press the "minute, hour, week", and set according to the current time.

2. Set the watering time: press the "program", the screen will change to setting interface, then press '' minute, hour, week" for presetting the pump working time, and then press the" program " for next time set (Others same as this setting, this machine can maximum have 80 setting). Press "clear" to remove the current setting; press the "clock" to exit. After setting, the machine will cycle running according to preset time.

(Note: the screen shows "Week123456", which means that it runs every day）

3. Set volume of water irrigation each time: hold the "program" button (screen count after 80 times) until the screen appears "E10" etc. character (10 means irrigate 10 second), then press "Hour, minite" button，for each time that the pump running between 01-99 seconds.

4. Press "Run" button, you can select the off, auto, on and other machine running state, press "manual" button means on, without press means off.

5. Press long time of  "Clear"  button,  you can lock and unlock the button;

6. manual button, press for on immediately.

Pipe installation:

1. The machine is equipped with 2 sizes of tubes (outer diameter 6mm and 9mm);According to the length required, cut one pcs of 9mm pipes, one fit into the machine intake hole, and the other side fit with filter head, Put into the water container, and become a inlet water pipe system. Cut another 9mm pipes, one head insert into the machine water outlet hole, the other head insert into the 6/4 variable diameter T fitting, and become outlet water pipe system.

2. According to the demand, cut few pieces of 6mm pipe, respectively connected by 4mm T fitting with 6/4 fitting, and install the nozzle if required.

Attentions：

In winter, when the temperature is below freezing, please take it indoors so as not to freeze the pipe and freeze the water pump.

The host after close the top cover, and anti raining, but strictly not allowed to put the whole machine in water.

If you do not use for a long time. Please turn off the power switch at the bottom.

 
Package Included:
1 x Set of Automatic Watering Device

More Details: