Search
Search Criteria
Products meeting the search criteria
Description: The DRV8871 device is a brushed-DC motor driver for printers, appliances, industrial equipment, and other small machines. Two logic inputs control the H- bridge driver, which consists of four N-channel MOSFETs that can control motors bidirectionally with up to 3.6-A peak current. Th..
$13.99
Ex Tax:$13.99
>
Description: Double H bridge drive
Chip: L298N (ST NEW)
Logical voltage: 5V
Drive voltage: 5V-35V
Logical current: 0mA-36mA
Drive current: 2A (MAX single bridge)
Storage temperature: -20 to +135
Max power: 25W
Weight: 30g
Size: 43 x 43 ..
$25.99
Ex Tax:$25.99
>
Features:
Motor drive module comes with its own four HG7881 chip.
Can drive 4 DC motors, or two 4-wire 2-phase stepping motor.
Specifications:
Module supply voltage: 2.5-12V
Suitable for the motor range: motor operating voltage 2.5V-12V
0.8A maximum operating ..
$29.99
Ex Tax:$29.99
Content-Length: 1975
>
Feature:
1. It is suitable for driving stepper motors of 8V~35V 2A or less
2. Only simple step and direction control interface
3. Five different stepping modes: full, half, 1/4, 1/8 and 1/16
4. The adjustable potentiometer ca..
$12.99
Ex Tax:$12.99
>
Description:
1. The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0V to 5V pulse. (or 0V to 3.3V pulse if you solder SJ2 closed on the EasyDriver)
2. EasyDriver requires a 7V to 30V supply to power the motor and can power any..
$22.99
Ex Tax:$22.99
>
Parameters:
Size: 18.5 x 16 mm
Input voltage: 3-10V
Single H bridge output current: 1.5A, can drive 2 dc deceleration motors.
Built-in overcurrent protection, short circuit protection, undervoltage latching and overheating protection. Sleep mode with low power consumption.
..
$12.99
Ex Tax:$12.99
>
Specicications:
Input voltage: 3 - 10V
Size: 18.5*16mm
Single H bridge output current: 1.5A, can drive 2 DC geared motors.
Built-in overcurrent protection, short circuit protection, undervoltage lockout and overtemperature protection. With low power sleep mode.
Uses: It ..
$19.99
Ex Tax:$19.99
Content-Length: 1851
>
Feature:
1. Onboard Two PCS HG7881 motor controller chip
2. Can drive 2 DC motors simultaneously, or one 4-wire 2-phase stepping motor
3. Input voltage: 2.5-12V
4. Has a continuous current of 800mA per channel output ..
$10.86
Ex Tax:$10.86
>
Description:
There are two L9110S motor control chip onboard
This module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motorFeature:
Work under low static current
Power supply voltage: DC 2.5V - 12V
Each channel has 800mA continuous current output
Low saturation pr..
$14.99
Ex Tax:$14.99
>
Introduction:
Two the L9110S motor control chip Onboard
The module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor
The module input voltage: 2.5-12V
The 800mA continuous current output capability per channel
Feature:
1. Low static work..
$13.99
Ex Tax:$13.99
>
Features:
A, B, C, D LEDs indicate the shape of the four-phase stepper motor
It is equipped with a standard interface for stepper motors and can be inserted directly during use.
Dimensions: 31 × 35mm
Package Included:
10 x ULN2003 Driver Board..
$8.99
Ex Tax:$8.99
>
Feature:
Rated Voltage: DC5V-12V
4-phase
Reduction Ratio: 1/64
Step Torque Angle: 5.625°/64
DC Resistance: 200ω±7% (25°)
Insulation Resistance: >10Mω (500V)
Insulation Grade: A
No-load Pull in Frequency: >600Hz
No-load Pull out Frequency: >1000Hz
Pull in T..
$7.99
Ex Tax:$7.99