Menu
Your Cart

5Pcs MQ-7 MQ7 Carbon Monoxide CO Gas Sensor Detection Module

5Pcs MQ-7 MQ7 Carbon Monoxide CO Gas Sensor Detection Module
5Pcs MQ-7 MQ7 Carbon Monoxide CO Gas Sensor Detection Module
5Pcs MQ-7 MQ7 Carbon Monoxide CO Gas Sensor Detection Module
5Pcs MQ-7 MQ7 Carbon Monoxide CO Gas Sensor Detection Module
5Pcs MQ-7 MQ7 Carbon Monoxide CO Gas Sensor Detection Module
5Pcs MQ-7 MQ7 Carbon Monoxide CO Gas Sensor Detection Module
5Pcs MQ-7 MQ7 Carbon Monoxide CO Gas Sensor Detection Module
5Pcs MQ-7 MQ7 Carbon Monoxide CO Gas Sensor Detection Module
5Pcs MQ-7 MQ7 Carbon Monoxide CO Gas Sensor Detection Module
5Pcs MQ-7 MQ7 Carbon Monoxide CO Gas Sensor Detection Module
5Pcs MQ-7 MQ7 Carbon Monoxide CO Gas Sensor Detection Module
5Pcs MQ-7 MQ7 Carbon Monoxide CO Gas Sensor Detection Module
5Pcs MQ-7 MQ7 Carbon Monoxide CO Gas Sensor Detection Module
5Pcs MQ-7 MQ7 Carbon Monoxide CO Gas Sensor Detection Module
5Pcs MQ-7 MQ7 Carbon Monoxide CO Gas Sensor Detection Module
5Pcs MQ-7 MQ7 Carbon Monoxide CO Gas Sensor Detection Module
5Pcs MQ-7 MQ7 Carbon Monoxide CO Gas Sensor Detection Module
$10.99
Ex Tax: $10.99
  • Stock: In Stock
  • Model: EB0045595
  • SKU: EB0045595
 
Sensitive material MQ-7 gas sensors used in clean air, low conductivity tin oxide (SnO2). High-low temperature cycling detection mode (1.5V heating) carbon monoxide detector, conductivity sensor with the increasing concentration of carbon monoxide gas in the air increases,high-temperature (5.0V heating) cleaning cryoadsorption stray gases. Using a simple circuit to change the conductivity, concentration of the gas is converted to the corresponding output signal. MQ-7 gas sensor of high sensitivity for carbon monoxide, this sensor can detect a variety of gases containing carbon monoxide, is a low-cost sensors for a variety of applications.
 
Application:
 
Can be used for home and factory gas leakage monitoring devices, suitable for liquefied petroleum gas, butane, propane, methane, smoke, etc.
 
Features:
 
- Using high-quality dual-panel design,with power indicator and TTL signal output instructions.
- The switching signal having a DO (TTL) output and analog output AO.
- TTL output valid signal is low. ( Low-level signal when the output light can be directly connected to the microcontroller or relay module )
- Analog output voltage with the higher concentration of higher voltage
- There are four screw holes for easy positioning.
- Has a long life and reliable stability
- Rapid response and recovery characteristic
 
Specifications:
 
Input voltage : DC5V Power consumption ( current ): 150mA
DO output : TTL digital 0 and 1 ( 0.1 and 5V)
AO output :0.1-0 .3 V ( relative to pollution ),the maximum Concentration of a voltage of about 4V
Special note: After the sensor is powered,needs to warm up around 20S,measured data was stable,heat sensor is a normal phenomenon,because the internal heating wire,if hot is not normal .
Wiring:
VCC: positive power supply (5V)
GND: power supply is negative
DO: TTL switching signal output
AO: analog signal output
 
NOTE:
 
After the sensor is powered, need to warm about 20S, measured data becomes stable, heat sensor is normal
 
Package Included:
 
5 x  MQ-7 MQ7 Carbon Monoxide CO Gas Sensor Detection Module


5Pcs-MQ-7-MQ7-Carbon-Monoxide-CO-Gas-Sensor-Detection-Module-1569883
5Pcs-MQ-7-MQ7-Carbon-Monoxide-CO-Gas-Sensor-Detection-Module-1569883
5Pcs-MQ-7-MQ7-Carbon-Monoxide-CO-Gas-Sensor-Detection-Module-1569883
5Pcs-MQ-7-MQ7-Carbon-Monoxide-CO-Gas-Sensor-Detection-Module-1569883
5Pcs-MQ-7-MQ7-Carbon-Monoxide-CO-Gas-Sensor-Detection-Module-1569883

Write a review

Note: HTML is not translated!
Bad Good

Shipping Time


After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

img

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details. 


Shipping Rates


You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:


Shipping MethodShipping RatesShipping Times
Flat Shipping (Promotion)
$10About 5-30 Working Days to Worldwide (Only include Monday to Saturday )

Standard Express(0.5KG starting price listed)

Based On WeightsAbout 5-15 Working Days to Worldwide (Only include Monday to Saturday )

Priority Express (0.5KG starting price listed)

Based On WeightsAbout 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible. 

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!