Menu
Your Cart

-717 OpenLog Data Recorder Flash Recorder Sensor Module Support 64GB Micro SD Card

-717 OpenLog Data Recorder Flash Recorder Sensor Module Support 64GB Micro SD Card
-717 OpenLog Data Recorder Flash Recorder Sensor Module Support 64GB Micro SD Card
-717 OpenLog Data Recorder Flash Recorder Sensor Module Support 64GB Micro SD Card
-717 OpenLog Data Recorder Flash Recorder Sensor Module Support 64GB Micro SD Card
-717 OpenLog Data Recorder Flash Recorder Sensor Module Support 64GB Micro SD Card
-717 OpenLog Data Recorder Flash Recorder Sensor Module Support 64GB Micro SD Card
-717 OpenLog Data Recorder Flash Recorder Sensor Module Support 64GB Micro SD Card
-717 OpenLog Data Recorder Flash Recorder Sensor Module Support 64GB Micro SD Card
-717 OpenLog Data Recorder Flash Recorder Sensor Module Support 64GB Micro SD Card
-717 OpenLog Data Recorder Flash Recorder Sensor Module Support 64GB Micro SD Card
-717 OpenLog Data Recorder Flash Recorder Sensor Module Support 64GB Micro SD Card
-717 OpenLog Data Recorder Flash Recorder Sensor Module Support 64GB Micro SD Card
-717 OpenLog Data Recorder Flash Recorder Sensor Module Support 64GB Micro SD Card
$10.99
Ex Tax: $10.99
  • Stock: In Stock
  • Model: EB0043786
  • SKU: EB0043786
Feature:
 
The OpenLog Data Logger is a simple-to-use, open-source solution for logging serial data from your projects. The OpenLog provides a simple serial interface to log data from a project to a microSD card.
 
Power:
 
VCC Input 3.3V-12V (Recommended 3.3V-5V)
RXI Input 2.0V-3.8V
TXO Output 3.3V
Idle Current Draw ~2mA-5mA (w/out microSD card), ~5mA-6mA (w/ microSD card)
Active Writing Current Draw ~20-23mA (w/ microSD card)
 
Tips: The OpenLog's current draw is about 20mA to 23mA when writing to a microSD. Depending on the size of the microSD card and its manufacturer, the active current draw can vary when the OpenLog is writing to the memory card. Increasing the baud rate will also pull more current.
 
Microcontroller:
 
The OpenLog runs off of an onboard ATmega328, running at 16MHz thanks to the onboard crystal. The ATmega328 has the Optiboot bootloader loaded on it, which allows the OpenLog to be compatible with the " Uno" board setting in the IDE.
 
Interface:
 
Serial UART:
The primary interface with the OpenLog is the FTDI header on the board edge. This header is designed to plug directly into an Pro or Pro Mini, which allows the microcontroller to send the data over a serial connection to the OpenLog.
SPI:
There are also four SPI test points broken out on the opposite end of the board. You can use these to reprogram the bootloader on the ATmega328.
 
microSD Card:
 
All data logged by the OpenLog is stored on the microSD card. The OpenLog works with microSD cards that involve the following features:
 
64MB to 32GB
FAT16 or FAT32

Package includes:

1 x Sensor module with pin



CJMCU-717-OpenLog-Data-Recorder-Flash-Recorder-Sensor-Module-Support-64GB-Micro-SD-Card-1461328

CJMCU-717-OpenLog-Data-Recorder-Flash-Recorder-Sensor-Module-Support-64GB-Micro-SD-Card-1461328

CJMCU-717-OpenLog-Data-Recorder-Flash-Recorder-Sensor-Module-Support-64GB-Micro-SD-Card-1461328

CJMCU-717-OpenLog-Data-Recorder-Flash-Recorder-Sensor-Module-Support-64GB-Micro-SD-Card-1461328

CJMCU-717-OpenLog-Data-Recorder-Flash-Recorder-Sensor-Module-Support-64GB-Micro-SD-Card-1461328

CJMCU-717-OpenLog-Data-Recorder-Flash-Recorder-Sensor-Module-Support-64GB-Micro-SD-Card-1461328

CJMCU-717-OpenLog-Data-Recorder-Flash-Recorder-Sensor-Module-Support-64GB-Micro-SD-Card-1461328

CJMCU-717-OpenLog-Data-Recorder-Flash-Recorder-Sensor-Module-Support-64GB-Micro-SD-Card-1461328

CJMCU-717-OpenLog-Data-Recorder-Flash-Recorder-Sensor-Module-Support-64GB-Micro-SD-Card-1461328

Write a review

Note: HTML is not translated!
Bad Good

Shipping Time


After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

img

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details. 


Shipping Rates


You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:


Shipping MethodShipping RatesShipping Times
Flat Shipping (Promotion)
$10About 5-30 Working Days to Worldwide (Only include Monday to Saturday )

Standard Express(0.5KG starting price listed)

Based On WeightsAbout 5-15 Working Days to Worldwide (Only include Monday to Saturday )

Priority Express (0.5KG starting price listed)

Based On WeightsAbout 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible. 

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!

Tags: SD Card