7.5 Inch E-ink Screen Module 800x480 e-Paper Display SPI Interface 7.5inch e-Paper HAT (B) For Raspberry Pi

Based on 0 reviews. - Write a review

$76.99

Ex Tax: $76.99

Stock: In Stock
Model: EB0050454
SKU: EB0050454

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

Voltage: 5V

Precise details>>

Precise details:

>>>Manual: Click here to open<<<

Features:

-No backlight, keeps displaying last content for a long time even when power down

-Ultra low power consumption, basically power is only required for refreshing

-Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano

-SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.

-Onboard voltage translator, compatible with 3.3V / 5V MCUs

-Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Note:

Refresh mode:

Full brush: The electronic ink screen will flicker many times during the refresh process (the number of flickers depends on the refresh time). The flicker is to remove the residual image and achieve the best display effect

Local brushing: The electronic ink screen has no flicker effect during the refreshing process. Users who use the local brush function should perform a full brush operation to remove the residual image after refreshing several times, otherwise the residual image problem will become more and more serious, and even damage the screen (currently only some black and white electronic ink screens support local brush, specific reference Product page description)

Refresh frequency:

During use, it is recommended that customers set the refresh interval of the electronic ink screen to at least 180 seconds (except products that support the local brush function)

During the standby process (that is, after the refresh operation), it is recommended that customers set the e-ink screen to sleep mode, or power-off operation (the power supply part of the ink screen can be disconnected with an analog switch) to reduce power consumption and extend the life of the e-ink screen. (Some electronic ink screens may be damaged beyond repair if they are left on for a long time)

In the process of using the three-color electronic ink screen, it is recommended that customers update the display screen at least once every 24 hours (if the screen remains the same for a long time, it will burn screen and it is difficult to repair)

Use place:

The e-ink screen is recommended to be used indoors. If you use it outdoors, you need to avoid direct sunlight on the electronic ink screen, and take UV protection measures. When designing electronic ink screen products, customers should pay attention to determine whether the use environment meets the temperature and humidity requirements of the electronic ink screen

Parameter:

OPERATING VOLTAGE	3.3V/5V	DISPLAY COLOR	red, black, white
INTERFACE	3-wire SPI, 4-wire SPI	GREY SCALE	2
OUTLINE DIMENSIONS	170.2 × 111.2mm	FULL REFRESH TIME	16s
DISPLAY SIZE	163.2 × 97.92mm	REFRESH POWER	48mW (typ.)
DOT PITCH	0.205 × 0.204mm	STANDBY CURRENT	<0.01uA (almost none)
RESOLUTION	800 × 480 pixels	VIEWING ANGLE	>170°

Package includes:

1 x 7.5inch e-Paper

1 x e-Paper Driver HAT

1 x RPi copper column package (2PCS set)

7.5" E-PAPER HAT (B)

Low Power Consumption, Wide Viewing Angle, Paper-Like Displaying Without Electricity