Menu
Your Cart

OLED/TFT Color DevKit ESP32 Watch Development Board

OLED/TFT Color DevKit ESP32 Watch Development Board
OLED/TFT Color DevKit ESP32 Watch Development Board
OLED/TFT Color DevKit ESP32 Watch Development Board
OLED/TFT Color DevKit ESP32 Watch Development Board
OLED/TFT Color DevKit ESP32 Watch Development Board
OLED/TFT Color DevKit ESP32 Watch Development Board
OLED/TFT Color DevKit ESP32 Watch Development Board
OLED/TFT Color DevKit ESP32 Watch Development Board
OLED/TFT Color DevKit ESP32 Watch Development Board
OLED/TFT Color DevKit ESP32 Watch Development Board
OLED/TFT Color DevKit ESP32 Watch Development Board
OLED/TFT Color DevKit ESP32 Watch Development Board
OLED/TFT Color DevKit ESP32 Watch Development Board
OLED/TFT Color DevKit ESP32 Watch Development Board
OLED/TFT Color DevKit ESP32 Watch Development Board
OLED/TFT Color DevKit ESP32 Watch Development Board
OLED/TFT Color DevKit ESP32 Watch Development Board
OLED/TFT Color DevKit ESP32 Watch Development Board
OLED/TFT Color DevKit ESP32 Watch Development Board
OLED/TFT Color DevKit ESP32 Watch Development Board
OLED/TFT Color DevKit ESP32 Watch Development Board
$51.99
Ex Tax: $51.99
  • Stock: In Stock
  • Model: EB0041569
  • SKU: EB0041569

Available Options

  • Voltage: 5V(USB)
    Precise details>>

    What is it?
     
    It is a ESP32 Watch development board. There are two versions: OLED version and TFT color version. Both version share the same bottom board.
     
    Why did you make it?
     
    This product was planned at the same time of deauther wristband. I learned a lot of experience from deauther wristband and I knew ESP32 is a better choice for a "Watch".
     
    The break ou pads are also designed to connect different sensors.
     
    TX/RX could be used to communicate with computer or other control board.
     
    17/16 is IIC port could be connected with RTC module or other IIC sensors.
     
    SVP/SVN could input ADC signals.
     
    25/26 could output DAC signals.
     
    What makes it special?
     
    Small size: 3.8x4.5cm
    Height:1.5cm
    Double 4 layer board
    600mAh battery inside
    On/OFF Power Switch
    OLED version:1.3OLED SH1106(SDA-17,SCL-16)
    TFT color version: ST7789 240*240 LCD(SDA-17,SCL-16,DC-22,RES-23)
    Buzzer-32
    WS2812b RGB LED-33
    Navigation Button(Up-19,Center-18,Down-5)
    OLED version external slide button(22,23)
    Highlight LED(27)
    Indicate charging LED(On means Charging,OFF means Full)
    Reset and Flash Button at Bottom board
    Break ou GPIOs(TX,RX,17,16,SVP,SVN,25,26,GND,3V)

    SD Card support
     
    GPIO12--DAT2
    GPIO13--DAT3
    GPIO15--CMD
    GPIO14--CLK
    GPIO2--DAT0
    GPIO4--DAT1
    GPIO21--card
     
    Tutorial:

    1.Install the environment for ESP32
     
    2.Install OLED library
     
    Install TFT LCD library
     
    3.Install Adafruit NeoPixel Library
     
    4.Code Example for oled version
     
    Code Example for TFT color version
     
    Upload config

    Package Included:

    1 x DSTIKE ESP32 Watch DevKit



    OLEDTFT-Color-DevKit-ESP32-Watch-Development-Board-1561754
    OLEDTFT-Color-DevKit-ESP32-Watch-Development-Board-1561754
    OLEDTFT-Color-DevKit-ESP32-Watch-Development-Board-1561754
    OLEDTFT-Color-DevKit-ESP32-Watch-Development-Board-1561754
    OLEDTFT-Color-DevKit-ESP32-Watch-Development-Board-1561754

    Write a review

    Note: HTML is not translated!
    Bad Good

    Shipping Time


    After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

    The timeline of the whole shipping process is shown below:

    img

    The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

    Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

    Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details. 


    Shipping Rates


    You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:


    Shipping MethodShipping RatesShipping Times
    Flat Shipping (Promotion)
    $10About 5-30 Working Days to Worldwide (Only include Monday to Saturday )

    Standard Express(0.5KG starting price listed)

    Based On WeightsAbout 5-15 Working Days to Worldwide (Only include Monday to Saturday )

    Priority Express (0.5KG starting price listed)

    Based On WeightsAbout 3-7 Working Days to Worldwide (Only include Monday to Saturday )

    In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible. 

    If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!