STM32F103C8T6 64KB Flash STM32 Cortex-M3 Mini System Development Board STM Firmware Pins Soldered

Based on 0 reviews. - Write a review

$13.53

Ex Tax: $13.53

Stock: In Stock
Model: EB0041854
SKU: EB0041854

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

Variations:

1. With originalSTM bootloader firmware (doc AN2606). Use USB-UART adapter for programming. Pinheaders not soldered.

2. With bootloader compatible for Arduino IDE. For programming from Ard. IDE using USB port. Pinheaders soldered. (This item)

3. With bootloader compatible for Arduino IDE. For programming from Ard. IDE using USB port. Pinheaders not soldered.

Description:

This board is ARM Cortex-M3 Minimum System Development Board – STM32F103C8T6.

Board build in STM32F103C8T6 - STM32 microcontroller with ARM Coretex-M3 32-bit core.

Logiclevel - 3.3V

Board connects to the computer via microUSB cable (used for almost all Android smartphones).

You can supply power to board through the MicroUSB connector or to power pinheaders. The voltage regulator (LDO) can deal with incoming voltage from 4V to 8V DC. Output current for 3.3V - about 180mA (Please note that the higher the input voltage the lower the outgoing current). That will provide a reliable power most of your initial projects.

* D+ pull-up R=1.5K, crystal = precision clock resonator

Programming:

Using STMFlash Loader (ST-Link)

Set Boot Jumper-0 to 1

Set Boot Jumper-1 to 0

Connect USB-TTL Converter's TX to PA10 on STMBoard

Connect USB-TTL Converter's RX to PA9 on STMBoard

Give 3.3V power to STMboard using USB TTL converter

Press and release reset button once

Launch STMFlash Loader, Select Port Name (where your usb ttl converter is connected)

Select Parity as Even, Baudate as 115200, ECH0 Disabled and Timeout 10s

Press Next, and follow on screen instructions to program, erase or read microcontroller

Microcontroller	ATmega2560
USB-TTL converter	CH340G
Power Out	3.3V-180mА
Power Out	5V-800mА
Power IN. USB	5V
Power IN. VIN/DC Jack	6-12V
Power Consumption	5V 220mA
LogicLevel	5V
Clock Frequency	16MHz
Operating Supply Voltage	5V
Digital I/O	54
Analog I/O	16
Memory Size	256kb
Data RAM Type/Size	8Kb
Data ROM Type/Size	4Kb
Interface Type	ISP
Operating temperature	−40С°/+85С°
Length×Width	53.361×101.86mm

Documents:

Dimensional drawing: Click here to open

Pinout: Click here to open

Schematic: Click here to open

Package includes:

1 x Mini System Development Board

Shipping Time

After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.

Shipping Rates

You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:

Shipping Method Shipping Rates Shipping Times
Flat Shipping (Promotion)
$10 About 5-30 Working Days to Worldwide (Only include Monday to Saturday )
Standard Express（0.5KG starting price listed）
Based On Weights About 5-15 Working Days to Worldwide (Only include Monday to Saturday )
Priority Express （0.5KG starting price listed）
Based On Weights About 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!