3.5inch TFT 480*320 50FPS Touch Screen Display ABS Case Kit for Raspberry Pi 4 Model B

Based on 0 reviews. - Write a review

$29.99

Ex Tax: $29.99

Stock: In Stock
Model: EB0048248
SKU: EB0048248

Available Options

Color1

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

Type: Case

Precise details>>

Precise details:

Note: Raspberrry Pi is not included.

Introduction:

This is the dual use ABS case for 3.5 inch screen kit, suitable for Raspberry Pi 4 Model B.It is esay to install the case with screen and Raspberry Pi.When you use the Raspberry Pi with 3.5inch screen,please remove the cover of case;When you use Raspberry Pi with cooling fan,you needn't remover the cover of case.

Note:The 3.5inch screen and cooling fan can't be used at the same time.
If Raspberry Pi is equipped with GPIO display drivers,the HDMI port will have no signal output

Specifications:

Colour: Black

Material: ABS plastic

Size: 90*61*35

Applicable to: Raspberry Pi 4B

3.5-inch touch screen or fan that can install Raspberry Pi

Knowing that: 3.5-inch display and fan cannot be installed at the same time due to the PIN pin

3.5inch Touch Screen Features:

1. Physical resolution 320 x 480, with resistive touch control

2. With the refresh rate of raspberry pi around 50Hz, play video to play the game without pressure.

3. With the refresh rate of raspberry pie around 50Hz, play video to play the game without pressure

4. Support FBCP software drive, support double screen display, can adjust the resolution of the software to zoom

5. Raspberry Pi ZeroW, A, A+, B, B+, 2B, 3B, 3B+ , 4B)

6. Support Raspbian/Ubuntu/Kali system, provide driver and image

7. WIKI for reference: raspberrypiwiki.com/index.php/3.5_inch_LCD_B

Note:

Please plug the screen on Raspberry Pi's GPIO pins correctly( as the picture) , otherwise the touch function will be damaged.

How to Use the Touch LCD

Step 1:Download the Raspbian image

https://www.raspberrypi.org/downloads/raspbian/

Step 2: Burn the system image to the SD card

https://projects.raspberrypi.org/en/projects/raspberry-pi-setting-up/3

Stop 3 : Connect the LCD to Raspberry Pi , insert the system SD card , connect the Ethernet and power on it

Step 4: Open terminal(SSH) and install the driver on RaspberryPi

(1)Execute the following commands (RaspberryPi needs to connect Internet):

sudo rm -rf LCD-show

git clone https://github.com/goodtft/LCD-show.git

chmod -R 755 LCD-show

cd LCD-show/

sudo ./MHS35-show

(2) After the above commands are executed, the system will automatically restart and be able to display and touch normally now.

Install LCD driver

sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./LCD35-show

If Raspberry Pi is equipped with GPIO display drivers such as MPI2411, MPI2418, MPI2801, MPI3201, MPI3501, etc., the HDMI port will have no signal output
If you need to switch back to the HDMI display mode, execute:

cd LCD-show/
sudo ./LCD-hdmi

Download LCD Driver Manually

Driver download

Download:File:LCD-show.tar.gz

Touch screen calibration

This LCD can be calibrated using a program called xinput_calibrator
Install it with the commands:

cd LCD-show/
sudo dpkg -i -B xinput-calibrator_0.7.5-1_armhf.deb

Click the Men button on the task bar, choose Preference -> Calibrate Touchscreen.
Finish the touch calibration following the prompts. Maybe rebooting is required to make calibration active.
You can create a 99-calibration.conf file to save the touch parameters (not necessary if file exists).

 /ect/X11/xorg.conf.d/99-calibration.conf

Save the touch parameters

About Dual Use ABS Case:

1.The Case made of ABS material,support to install 3.5 inch touch screen,and need to remove the cover of case. When you don't use the 3.5 inch touchscreen , it is a general case with cooling fan.The 3.5inch screen and cooling fan can't be used at the same time.

2.The case is design for Raspberry Pi 4 Model B , remain almost all interface such as USB , Ethernet , A/V , micro HDMI , SD card slot , display , camera( CSI). (Note: A1 case remain GPIO and POE hole , but A2 case does not remian)

3.make 2 hole on the bottom so that you can hange the case on the wall or something else . This design is very convenient when using the 3.5 inch touchscreen.

Package Included:

1 x ABS box case
1 x touch screen
1 x touch screen pen

Note: Raspberrry Pi is not included.

Introduction:

Note:The 3.5inch screen and cooling fan can't be used at the same time.
If Raspberry Pi is equipped with GPIO display drivers,the HDMI port will have no signal output

Specifications:

Colour: Black

Material: ABS plastic

Size: 90*61*35

Applicable to: Raspberry Pi 4B

3.5-inch touch screen or fan that can install Raspberry Pi

Knowing that: 3.5-inch display and fan cannot be installed at the same time due to the PIN pin

3.5inch Touch Screen Features:

1. Physical resolution 320 x 480, with resistive touch control

2. With the refresh rate of raspberry pi around 50Hz, play video to play the game without pressure.

3. With the refresh rate of raspberry pie around 50Hz, play video to play the game without pressure

4. Support FBCP software drive, support double screen display, can adjust the resolution of the software to zoom

5. Raspberry Pi ZeroW, A, A+, B, B+, 2B, 3B, 3B+ , 4B)

6. Support Raspbian/Ubuntu/Kali system, provide driver and image

7. WIKI for reference: raspberrypiwiki.com/index.php/3.5_inch_LCD_B

Note:

Please plug the screen on Raspberry Pi's GPIO pins correctly( as the picture) , otherwise the touch function will be damaged.

How to Use the Touch LCD

Step 1:Download the Raspbian image

https://www.raspberrypi.org/downloads/raspbian/

Step 2: Burn the system image to the SD card

https://projects.raspberrypi.org/en/projects/raspberry-pi-setting-up/3

Stop 3 : Connect the LCD to Raspberry Pi , insert the system SD card , connect the Ethernet and power on it

Step 4: Open terminal(SSH) and install the driver on RaspberryPi

(1)Execute the following commands (RaspberryPi needs to connect Internet):

sudo rm -rf LCD-show

git clone https://github.com/goodtft/LCD-show.git

chmod -R 755 LCD-show

cd LCD-show/

sudo ./MHS35-show

(2) After the above commands are executed, the system will automatically restart and be able to display and touch normally now.

Install LCD driver

sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./LCD35-show

If Raspberry Pi is equipped with GPIO display drivers such as MPI2411, MPI2418, MPI2801, MPI3201, MPI3501, etc., the HDMI port will have no signal output
If you need to switch back to the HDMI display mode, execute:

cd LCD-show/
sudo ./LCD-hdmi

Download LCD Driver Manually

Driver download

Download:https://wiki.52pi.com/index.php/File:LCD-show.tar.gz

Touch screen calibration

This LCD can be calibrated using a program called xinput_calibrator
Install it with the commands:

cd LCD-show/
sudo dpkg -i -B xinput-calibrator_0.7.5-1_armhf.deb

Click the Men button on the task bar, choose Preference -> Calibrate Touchscreen.
Finish the touch calibration following the prompts. Maybe rebooting is required to make calibration active.
You can create a 99-calibration.conf file to save the touch parameters (not necessary if file exists).

 /ect/X11/xorg.conf.d/99-calibration.conf

Save the touch parameters

About Dual Use ABS Case:

3.make 2 hole on the bottom so that you can hange the case on the wall or something else . This design is very convenient when using the 3.5 inch touchscreen.

Package Included:

1 x ABS box case
1 x touch screen
1 x touch screen pen

Shipping Time

After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.

Shipping Rates

You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:

Shipping Method Shipping Rates Shipping Times
Flat Shipping (Promotion)
$10 About 5-30 Working Days to Worldwide (Only include Monday to Saturday )
Standard Express（0.5KG starting price listed）
Based On Weights About 5-15 Working Days to Worldwide (Only include Monday to Saturday )
Priority Express （0.5KG starting price listed）
Based On Weights About 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!

Tags: Raspberry Pi Case