Menu
Your Cart

10pcs 2CH Channel Optocoupler Isolation Relay Module 24V SCM PLC Signal Amplifier Board

10pcs 2CH Channel Optocoupler Isolation Relay Module 24V SCM PLC Signal Amplifier Board
10pcs 2CH Channel Optocoupler Isolation Relay Module 24V SCM PLC Signal Amplifier Board
10pcs 2CH Channel Optocoupler Isolation Relay Module 24V SCM PLC Signal Amplifier Board
10pcs 2CH Channel Optocoupler Isolation Relay Module 24V SCM PLC Signal Amplifier Board
10pcs 2CH Channel Optocoupler Isolation Relay Module 24V SCM PLC Signal Amplifier Board
10pcs 2CH Channel Optocoupler Isolation Relay Module 24V SCM PLC Signal Amplifier Board
10pcs 2CH Channel Optocoupler Isolation Relay Module 24V SCM PLC Signal Amplifier Board
10pcs 2CH Channel Optocoupler Isolation Relay Module 24V SCM PLC Signal Amplifier Board
10pcs 2CH Channel Optocoupler Isolation Relay Module 24V SCM PLC Signal Amplifier Board
$51.99
Ex Tax: $51.99
  • Stock: In Stock
  • Model: EB0047742
  • SKU: EB0047742
>

Structural Features:

 

1. Use Hongfa relay, stable and reliable performance;

2. Compatible with two input modes of positive control and negative control;

3. Each channel has an LED action indicator for a more intuitive understanding of product performance;

4. Each channel adopts optocoupler isolation to enhance anti-interference performance and isolation performance;

5. At the same time, the power supply and the "IN" control terminal are independently controlled;

6. The module adopts the standard "DIN" rail-type installation design, which is convenient and quick to install, firm and stable.

 

Technical Parameters:

 

1. Trigger signal: DC24V

2. Each trigger signal current: 5mA

3. Power supply voltage: DC24V

4. Each coil current: 18.8mA

5. Contact type: one normally open and one normally closed (single pole)

6. Maximum load current of each contact: 10A

7. Action time: below 12ms

8. Reset time: less than 4ms

9. Maximum switching frequency: 18000 times / hour

10. Mechanical life: more than 20 million times

11. Relay installation: plug-in type (No)

12: Module installation method: DIN standard rail installation

Positive control wiring introduction:

 

1. Power input terminal:

VCC is connected to the positive voltage, GND is connected to the negative voltage, and S / S is connected to the negative voltage

IN1, IN2 are connected to positive voltage control, IN1 controls  terminal, IN2 controls K2 terminal

2. Control device output:

The output terminal is clearly marked with 234, 3 is a common point, 2 is normally open, and 4 is normally closed. K1, K2 means two relays work.

 

Negative control wiring introduction:

 

1. Power input terminal:

VCC is connected to the positive voltage, GND is connected to the negative voltage, and S / S is connected to the positive voltage

IN1, IN2 are connected to negative voltage control, IN1 controls  terminal, IN2 controls K2 terminal

2. Control device output:

The output terminal is clearly marked with 234, 3 is a common point, 2 is normally open, and 4 is normally closed. , K2 means two relays work.

Package includes:

10 x Relay board


10pcs-2CH-Channel-Optocoupler-Isolation-Relay-Module-24V-SCM-PLC-Signal-Amplifier-Board-1672435

10pcs-2CH-Channel-Optocoupler-Isolation-Relay-Module-24V-SCM-PLC-Signal-Amplifier-Board-1672435

10pcs-2CH-Channel-Optocoupler-Isolation-Relay-Module-24V-SCM-PLC-Signal-Amplifier-Board-1672435

10pcs-2CH-Channel-Optocoupler-Isolation-Relay-Module-24V-SCM-PLC-Signal-Amplifier-Board-1672435


Write a review

Note: HTML is not translated!
Bad Good

Shipping Time


After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

img

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details. 


Shipping Rates


You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:


Shipping MethodShipping RatesShipping Times
Flat Shipping (Promotion)
$10About 5-30 Working Days to Worldwide (Only include Monday to Saturday )

Standard Express(0.5KG starting price listed)

Based On WeightsAbout 5-15 Working Days to Worldwide (Only include Monday to Saturday )

Priority Express (0.5KG starting price listed)

Based On WeightsAbout 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible. 

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!