Menu
Your Cart

Hall Effect Magnetic Sensor with Analog & Digital Output Module

Hall Effect Magnetic Sensor with Analog & Digital Output Module
Hall Effect Magnetic Sensor with Analog & Digital Output Module
Hall Effect Magnetic Sensor with Analog & Digital Output Module
Hall Effect Magnetic Sensor with Analog & Digital Output Module
Hall Effect Magnetic Sensor with Analog & Digital Output Module
Hall Effect Magnetic Sensor with Analog & Digital Output Module
Hall Effect Magnetic Sensor with Analog & Digital Output Module
Hall Effect Magnetic Sensor with Analog & Digital Output Module
Hall Effect Magnetic Sensor with Analog & Digital Output Module
Hall Effect Magnetic Sensor with Analog & Digital Output Module
Hall Effect Magnetic Sensor with Analog & Digital Output Module
Hall Effect Magnetic Sensor with Analog & Digital Output Module
Hall Effect Magnetic Sensor with Analog & Digital Output Module
$7.99
Ex Tax: $7.99
  • Stock: In Stock
  • Model: EB0043954
  • SKU: EB0043954
Feature:
 
The Hall Effect Magnetic Sensor can be used for detect the presence (or absence!) of nearby objects such as magnets.
If no magnetic field is present, the signal line of the sensor is HIGH (on digital out). If a magnetic field is presented to the sensor, the signal line goes LOW (on digital out), at the same time the LED (blue) on the sensor lights up. 
The distance detection to a magnetic object can be adjusted via the potentiometer on board.
It also has the Analog output, to determine the large of a magnetic field or the distance to an object.
The polarity of the magnetic field is of influence to the switching action. The front side of the sensor needs the opposite polarity as the back of the sensor to switch on.
 
Connection:
 
GND =  to GND
VCC =  to 5V
DO = to any Digital P/O
AO = to any Analog In

Documents:
 

Package includes:

1 x Hall Effect Magnetic Sensor


Sketch(Arduino):
#define SENSOR = 3; // define the Hall (magnetic) sensor Digital I/O#define LED = 13; // LED D13  void setup (){ pinMode (LED, OUTPUT) ; // LED on D13 pinMode (SENSOR, INPUT) ; // Hall (magnetic) sensor on D3}  void loop (){ if (digitalRead (SENSOR) ==LOW) // read seonsor and when the Hall sensor detects a magnetic field Arduino LED lights up { digitalWrite (Led, HIGH); } { digitalWrite (Led, LOW); }}




Robotdynreg-Hall-Effect-Magnetic-Sensor-with-Analog--Digital-Output-Module-1654895

Robotdynreg-Hall-Effect-Magnetic-Sensor-with-Analog--Digital-Output-Module-1654895

Robotdynreg-Hall-Effect-Magnetic-Sensor-with-Analog--Digital-Output-Module-1654895

Write a review

Note: HTML is not translated!
Bad Good

Shipping Time


After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

img

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details. 


Shipping Rates


You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:


Shipping MethodShipping RatesShipping Times
Flat Shipping (Promotion)
$10About 5-30 Working Days to Worldwide (Only include Monday to Saturday )

Standard Express(0.5KG starting price listed)

Based On WeightsAbout 5-15 Working Days to Worldwide (Only include Monday to Saturday )

Priority Express (0.5KG starting price listed)

Based On WeightsAbout 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible. 

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!

Tags: Hall Sensor