Menu
Your Cart

2.4G NF-03 Wireless SPI Mini Module SI24R1 250k~2Mbps Transparent Transmission Receiver For Doorbell Remote Control Switch

2.4G NF-03 Wireless SPI Mini Module SI24R1 250k~2Mbps Transparent Transmission Receiver For Doorbell Remote Control Switch
2.4G NF-03 Wireless SPI Mini Module SI24R1 250k~2Mbps Transparent Transmission Receiver For Doorbell Remote Control Switch
2.4G NF-03 Wireless SPI Mini Module SI24R1 250k~2Mbps Transparent Transmission Receiver For Doorbell Remote Control Switch
2.4G NF-03 Wireless SPI Mini Module SI24R1 250k~2Mbps Transparent Transmission Receiver For Doorbell Remote Control Switch
2.4G NF-03 Wireless SPI Mini Module SI24R1 250k~2Mbps Transparent Transmission Receiver For Doorbell Remote Control Switch
2.4G NF-03 Wireless SPI Mini Module SI24R1 250k~2Mbps Transparent Transmission Receiver For Doorbell Remote Control Switch
2.4G NF-03 Wireless SPI Mini Module SI24R1 250k~2Mbps Transparent Transmission Receiver For Doorbell Remote Control Switch
2.4G NF-03 Wireless SPI Mini Module SI24R1 250k~2Mbps Transparent Transmission Receiver For Doorbell Remote Control Switch
2.4G NF-03 Wireless SPI Mini Module SI24R1 250k~2Mbps Transparent Transmission Receiver For Doorbell Remote Control Switch
2.4G NF-03 Wireless SPI Mini Module SI24R1 250k~2Mbps Transparent Transmission Receiver For Doorbell Remote Control Switch
2.4G NF-03 Wireless SPI Mini Module SI24R1 250k~2Mbps Transparent Transmission Receiver For Doorbell Remote Control Switch
$5.99
Ex Tax: $5.99
  • Stock: In Stock
  • Model: EB0045519
  • SKU: EB0045519
Introduction:
 
NF-03 is a 2.4G wireless module with small size and on-board antenna. It has a high airspeed (up to 2Mbps), SPI interface, and a pure hardware module. It has high stability, high cost performance and good spectrum test characteristics. , small size, using all industrial grade components.
NF-03 can be widely used in various Internet of Things applications, and is suitable for wireless mouse and keyboard, wireless remote control, somatosensory equipment, active RFID, NFC, low-power self-organizing network wireless sensor network nodes. Ideal solution for IoT applications

Feature:


1. Stamp hole, ultra-small package, built-in 2.4G antenna, compact size, easy to use
2. Support data reception of six channels
3. Support normal modulation methods such as GFSK/FSK
4. Support 2Mbps/1Mbps/250Kbps data rate
5. Multi-frequency point: 126 frequency points to meet the needs of multi-point communication and frequency hopping communication
6. Internally integrated high PSRR LDO
7. Wide power supply voltage range: 1.9~3.6V
8. Average emission current as low as 110mA
9. Receive sensitivity: -96dBm@250kbps
10. Maximum transmit power: +7dBm
11. With four-wire SPI interface, the speed can up to 10MHz
12. Internal integrated intelligent ARQ baseband protocol engine
13. Transceiver data hardware interrupt output
14. Support 1bit RSSI output
15. Low application cost: SI24R1 integrates all high-speed signal processing parts related to RF protocol, such as: automatic retransmission of lost data packets and automatic generation of response signals, etc. The SI24R1 SPI interface can be connected with the hardware SPI port of the microcontroller or with a single-chip microcomputer. The I/O port is simulated, and the internal FIFO can interface with various high and low speed microprocessors, which is convenient for using low-cost single-chip microcomputers.
16. Easy to develop: Since the link layer is fully integrated on the module, it is very easy to develop. Automatic retransmission function, automatic detection and retransmission of lost data packets, retransmission time and number of retransmissions. Software control automatically stores the packet auto-answer function without receiving the response signal. After receiving valid data, the module automatically sends a response. Signal, no need to separately program carrier detection - fixed frequency detection built-in hardware CRC error detection and point-to-multipoint communication address control packet transmission error counter and carrier detection function can be used for frequency hopping setting can simultaneously set six receiving channel addresses, which can be selective The open receiving channel stamp hole has a 1.27mm pitch for easy embedded applications.

PIN Name Direction Function
1 VCC - Power supply must be between 2.0 ~ 3.6V
2 GND - Ground wire, connected to the power reference ground
3 CE Input Module control pin
4 CSN Input Module chip select pin for starting an SPI communication
5 SCK Input Module SPI bus clock
6 MOSI Input Module SPI Data Input Pin
7 MISO Output Module SPI Data Output Pin
8 IRQ Output Module interrupt signal output, active low

Module model NF-03
Package Stamp hole
Size 18*12mm
Communication Interface SPI (up to 10Mbps)
Air speed 250k~2Mbps 3 levels adjustable (250kbps, 1Mbps, 2Mbps)
Spectrum range 2400MHz~2525MHz adjustable, 1MHz stepping
Antenna form Onboard PCB antenna, gain 2dBi
Maximum transmit power 7dBm
Receiving sensitivity -96dBm@250kbps
Average current Emission current: 25mA (7dBm)
Receive current: 15mA (2Mbps)
Shutdown current: 1.0uA (Shutdown mode)
Power supply range 1.9~3.6V, typical value 3.3V
Operating temperature -20 °C ~ 85 °C
Storage environment -20 °C ~ 90 °C, < 90% RH

Package includes:

1 x 2.4G Wireless module



24G-NF-03-Wireless-SPI-Mini-Module-SI24R1-250k2Mbps-Transparent-Transmission-Receiver-For-Doorbell-R-1505054

24G-NF-03-Wireless-SPI-Mini-Module-SI24R1-250k2Mbps-Transparent-Transmission-Receiver-For-Doorbell-R-1505054

24G-NF-03-Wireless-SPI-Mini-Module-SI24R1-250k2Mbps-Transparent-Transmission-Receiver-For-Doorbell-R-1505054

24G-NF-03-Wireless-SPI-Mini-Module-SI24R1-250k2Mbps-Transparent-Transmission-Receiver-For-Doorbell-R-1505054

24G-NF-03-Wireless-SPI-Mini-Module-SI24R1-250k2Mbps-Transparent-Transmission-Receiver-For-Doorbell-R-1505054

24G-NF-03-Wireless-SPI-Mini-Module-SI24R1-250k2Mbps-Transparent-Transmission-Receiver-For-Doorbell-R-1505054

24G-NF-03-Wireless-SPI-Mini-Module-SI24R1-250k2Mbps-Transparent-Transmission-Receiver-For-Doorbell-R-1505054

24G-NF-03-Wireless-SPI-Mini-Module-SI24R1-250k2Mbps-Transparent-Transmission-Receiver-For-Doorbell-R-1505054

Write a review

Note: HTML is not translated!
Bad Good

Shipping Time


After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

img

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details. 


Shipping Rates


You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:


Shipping MethodShipping RatesShipping Times
Flat Shipping (Promotion)
$10About 5-30 Working Days to Worldwide (Only include Monday to Saturday )

Standard Express(0.5KG starting price listed)

Based On WeightsAbout 5-15 Working Days to Worldwide (Only include Monday to Saturday )

Priority Express (0.5KG starting price listed)

Based On WeightsAbout 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible. 

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!