Menu
Your Cart

ESP32-PICO-KIT V4 USB-UART ESP32 SiP Development Board

ESP32-PICO-KIT V4 USB-UART ESP32 SiP Development Board
ESP32-PICO-KIT V4 USB-UART ESP32 SiP Development Board
ESP32-PICO-KIT V4 USB-UART ESP32 SiP Development Board
ESP32-PICO-KIT V4 USB-UART ESP32 SiP Development Board
ESP32-PICO-KIT V4 USB-UART ESP32 SiP Development Board
ESP32-PICO-KIT V4 USB-UART ESP32 SiP Development Board
ESP32-PICO-KIT V4 USB-UART ESP32 SiP Development Board
ESP32-PICO-KIT V4 USB-UART ESP32 SiP Development Board
ESP32-PICO-KIT V4 USB-UART ESP32 SiP Development Board
$17.99
Ex Tax: $17.99
  • Stock: In Stock
  • Model: EB0042748
  • SKU: EB0042748
Overview:
 
ESP32-PICO-KIT is a mini development board produced by Espressif. At the core of this board is the ESP32-PICO-D4, a System-in-Package (SiP) module with complete Wi-Fi and bluetooth functionalities. Comparing to other ESP32 modules, the ESP32-PICO-D4 integrates several peripheral components in one single package, that otherwise would need to be installed separately. This includes a 40 MHz crystal oscillator, a 4 MB flash, filter capacitors and RF matching links in. This greatly reduces quantity and costs of additional components, subsequent assembly and testing cost, as well as overall product complexity.
The development board integrates a USB-UART Bridge circuit, allowing the developers to connect the board to a PC’s USB port for downloads and debugging.
For easy interfacing, all the IO signals and system power on ESP32-PICO-D4 are led out through two rows of 20 x 0.1” pitch header pads on both sides of the development board. To make the ESP32-PICO-KIT easier for Dupont wires, 2 x 17 header pads are populated with two rows of female pin headers. The remaining 2 x 3 header pads grouped on each side of the board besides the antenna are not populated, and may be populated later by the user if required.
 
Functional Description:
 
The following list and figure below describe key components, interfaces and controls of ESP32-PICO-KIT board.
 
ESP32-PICO-D4
Standard ESP32-PICO-D4 module soldered to the ESP32-PICO-KIT board. The complete system of the ESP32 chip has been integrated into the SiP module, requiring only external antenna with LC matching network, decoupling capacitors and pull-up resistors for EN signals to function properly.
LDO
5V-to-3.3V Low dropout voltage regulator (LDO).
USB-UART Bridge
A single chip USB-UART bridge: CP2102 in V4 of the board and CP2102N in V4.1. The first provides up to 1 Mbps transfer rates, while the latter up to 3 Mbps transfers rates.
Micro USB Port
USB interface. It functions as the power supply for the board and the communication interface between PC and ESP32-PICO-KIT.
Power On LED
Turns on when the power supply is applied to the board. For details see schematic in Related Documents.
I/O
All the pins on ESP32-PICO-D4 are broken out to the female pin headers on the board. Users can program ESP32 to enable multiple functions such as PWM, ADC, DAC, I2C, I2S, SPI, etc. For details please see section Pin Descriptions.
BOOT Button
Holding down the Boot button and pressing the EN button initiates the firmware download mode. Then user can download firmware through the serial port.
EN Button
Reset button: pressing this button resets the system.

Power Supply Options:
 
The following options are available to provide power supply to the ESP32-PICO-KIT:
 
Micro USB port, this is default power supply connection
5V / GND header pins
3V3 / GND header pins

More informations: https://docs.espressif.com/projects/esp-idf/en/latest/get-started/get-started-pico-kit.html

Package includes:

1 x Development board

Espressif-ESP32-PICO-KIT-V4-USB-UART-ESP32-SiP-Development-Board-1436272


Espressif-ESP32-PICO-KIT-V4-USB-UART-ESP32-SiP-Development-Board-1436272

Write a review

Note: HTML is not translated!
Bad Good

Shipping Time


After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.

The timeline of the whole shipping process is shown below:

img

The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.

Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details. 


Shipping Rates


You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:


Shipping MethodShipping RatesShipping Times
Flat Shipping (Promotion)
$10About 5-30 Working Days to Worldwide (Only include Monday to Saturday )

Standard Express(0.5KG starting price listed)

Based On WeightsAbout 5-15 Working Days to Worldwide (Only include Monday to Saturday )

Priority Express (0.5KG starting price listed)

Based On WeightsAbout 3-7 Working Days to Worldwide (Only include Monday to Saturday )

In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible. 

If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!