MHS-5200A 25MHz Digital DDS Dual-channel Signal Generator Source Frequency Meter 13N2
- Stock: In Stock
- Model: EB004755
- SKU: EB004755
It adopts large scale of FPGA integrated circuits, high-speed MCU microprocessor and with high precision oscillator as base in the inner circuit, which make the signals more stable.
SMT process can greatly improve the anti-interference and lifetime of the instrument.
It has entirely independent dual-channel DDS signal and TTL level output, can generate signals of sine/triangle/square/sawtooth/pulse wave, white noise, etc.
This instrument is of great advantage in generating signal, scanning waveform, measuring parameters, etc.
It's an ideal testing or measuring instrument for electronics engineer, electronic laboratory, teaching and researching.
| Model Options | |||
| MHS-5200A | |||
| Sine Wave | 0~25MHz | ||
| Square Wave | 0~6MHz | ||
| Triangle Wave | 0~6MHz | ||
| Other Waveform | 0~6MHz | ||
| Frequency characteristics | |||
| The minimum frequency resolution | 0.01Hz | ||
| Frequency error | ±5×10-6 | ||
| Frequency stability | ±1×10-6/5小时 | ||
| Output Impedance | 50Ω±10% | ||
| Amplitude characteristics | |||
| Amplitude range (peak to peak) | 5mVp-p~20Vp-p; | ||
| Amplitude | 1mVp-p | ||
| Amplitude stability | ±0.5% (3 Hours) | ||
| Amplitude error | ± 1%+10mV | ||
| Offset Range | -120% | ||
| Bias resolution | 1% | ||
| Phase range | 0 | ||
| Phase resolution | 1° | ||
| Waveform characteristics | |||
| Output waveform types | Sine, square, pulse, triangle, ramp, TTL / CMOS digital signal wave, wave signal noise, half-wave signal, full-wave signal, the index rose waveform signal index down waveform signal, multiple audio signals, pulse Sinclair a variety of custom arbitrary waveform signal wave signal, Lorentz pulse signals, DC signals. | ||
| Output modulation | Frequency sweep, the amplitude of the scan, the scanning duty cycle, burst | ||
| Wave length | 2048 points | ||
| Sample Rate | 200MSa/s | ||
| Waveform amplitude resolution | 12 bits | ||
| Sine wave | Harmonic contact system | 40dBc(<1MHz) ,35dBc(1MHz~25MHz) |
| Distortion | <0.8%(20Hz~20KHz) |
| Square wave | Lift along the time | ≤20ns |
| Overshoot | ≤5% | |
| Duty cycle adjustment range | 0.1%~99.9% | |
| TTL signal | Output Level | >3Vpp |
| Fan-out factor | >20TTL load | |
| Lift along the time | ≤20ns | |
| CMOS signal | LOW | <0.3V |
| High | 1V~10V | |
| Lift along the time | ≤20ns | |
| Sawtooth | Duty cycle> 50% | L sawtooth |
| Duty cycle <50% | Sawtooth down | |
| Arbitrary Waveform | Quantity | 16 group |
| Memory depth / group | 1KB/16 group | |
| Scan | Scan Mode | Scanning frequency, the amplitude of the scan, the scanning duty cycle |
| Scan time | 1S | |
| Scan range | It is decided by the value stored in the position of CH1 M1 and CH2 | |
| Memory | Number of storage space | 16 |
| Storage location | M0~M15 |
| An external input signal measurements | |
| Frequency range | GATE-TIME=10S 0.1HZ - 60MHZ GATE-TIME=1S 1HZ - 60MHZ GATE-TIME=0.1S 10HZ - 60MHZ GATE-TIME=0.01S 100HZ - 60MHZ |
| Minimum input voltage | 0.5Vp-p |
| The maximum allowable input voltage | 20Vp-p |
| Counting range | 0~4294967295 |
| Counting | Manually |
| Positive and negative pulse width measurement | 10ns resolution, the maximum measurable 10s |
| Periodic measurements | 20ns resolution, the maximum measurable 20s |
| Duty cycle measurements | 0.1% resolution, measuring range from 0.1% to 99.9% |
| Source Selection | 1.Ext.IN input (analog), 2.TTL_IN input (digital signal) |
| Communication features | |
| Interface | It uses USB to serial interface |
| Communication speed | 57600bps |
| Protocol | Using the command line, open protocols |
| Other | |
| Power supply | DC5V±0.5V |
| Size | 19.5 * 17.5 * 7cm / 7.67 * 6.9 * 2.75in |
| Weight | 542g / 19.12oz |
| Package Size | 25 * 21 * 9.5cm / 9.84 * 8.27 * 3.74in (L * W * H) |
| Package Weight | 950g / 33.23oz |
1 x USB Cable
1 x CD
1 x TTL Expansion Board
2 x BNC Clips Cable
Shipping Time
After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.
The timeline of the whole shipping process is shown below:
The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.
Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.
Shipping Rates
You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:
You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:
| Shipping Method | Shipping Rates | Shipping Times |
| Flat Shipping (Promotion) | $10 | About 5-30 Working Days to Worldwide (Only include Monday to Saturday ) |
Standard Express（0.5KG starting price listed） | Based On Weights | About 5-15 Working Days to Worldwide (Only include Monday to Saturday ) |
Priority Express （0.5KG starting price listed） | Based On Weights | About 3-7 Working Days to Worldwide (Only include Monday to Saturday ) |
In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.
If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!
