405nm-450nm Laser Module Variable Focus PWM Modulation for Master Laser Engraver Deep Carving Desktop Logo Printer
- Stock: In Stock
- Model: EB0017356
- SKU: EB0017356
| Applicable NEJE Laser Engraving Machine | ||
 | NEJE 3500mW Laser Engraver | Please click that: ID: 1448860 |
 | NEJE 7W Laser Engraver | Please click that: ID: 1549050 |
 | NEJE 20W Laser Engraver | Please click that: ID: 1582758 |
Specification:
| NEJE 405nm 3500mW Laser Module | |
| Wavelength | 405nm |
| Radiator Size | 30*60mm |
| Material | Copper + Aluminum |
| Weight | 116g |
| Input | 12V280mA (about 3500mw) |
| Output Optical Power | 600mw |
| PWM | 20KHz / 3.3V |
| Temperature Sensor | Yes |
| Focus Range | 10mm-50mm ( 10mm is best) |
| Best Focal Length | 10mm from the light exit |
| Focus Diameter | 0.01mm |
| Drive Position | Built-in |
| Is the Power Adjustable | PWM can be adjusted |
| Drive Protection | Surge Protection, Overvoltage Protection |
| Input Power | approx. 12V280ma (including fan power) |
| Line Length | 300mm |
| Control Line Installation Method | Integrated |
| Fan Size | 30*10mm |
| Fan Speed | 10,000 rpm |
| Controllable Temperature | Less than 60 degrees Celsius |
| Interface Specification | 4pin PH2.0 (red: 12V, black: GND, yellow: PWM, green: temperature signal) |
| Engraving Material | Wood, gray paper card, non-transparent plastic, leather, paint pcba, etc.( flat, opaque and can be burned black) |
| Application | Application: Grayscale engraving, Photo engraving, Depth engraving, Paper cutting, g-code drawing... Especially good at grayscale engraving, depth of engraving 0.5-1mm, cutting 0.5mm, unable to engrave metal. |
| Note | 1. Please apply this module under the premise of safety protection! 2. Recommended application machine: NEJE Master |
| NEJE 450nm 7W Laser Module | |
| Wavelength | 450nm |
| Radiator Size | 30*60mm |
| Material | Copper + Aluminum |
| Weight | 116g |
| Input | 12V750mA (about 7w) |
| Output Optical Power | 2.5W |
| PWM | 20KHz / 3.3V |
| Temperature Sensor | Yes |
| Focus Range | 10mm-50mm ( 10mm is best) |
| Focus Diameter | 0.01mm |
| Best Focal Length | 10mm from the light exit |
| Interface Specification | 4pin PH2.0 (Red: 12V, Black: GND, Yellow: PWM, Green: Temperature Signal) |
| Drive Position | Built-in |
| Is the Power Adjustable | PWM can be adjusted |
| Drive Protection | Surge Protection, Overvoltage Protection |
| Input Power | approx. 12V750ma does not include fan power |
| Line Length | 300mm |
| Control Line Installation Method | Pluggable |
| Fan Size | 30*10mm |
| Fan Speed | 10,000 rpm |
| Controllable Temperature | Less than 60 degrees Celsius |
| Application | Depth Engraving, High-Speed Engraving, g-code drawing, Paper cutting, Wood cutting(<2mm) |
| Engraving Material | Wood, gray paper card, non-transparent plastic, leather, paint pcba, etc.( flat, opaque and can be burned black) |
| Note | 1. It is not possible to directly engrave the metal with strong mirror reflectivity, which may cause injury to the operator or burn the laser. 2. Please apply this module under the premise of safety protection! 3. Recommended application machine: NEJE Master |
| NEJE 450nm 20W Laser Module | |
| Wavelength | 450nm |
| Radiator Size | 30*80mm |
| Material | Copper + Aluminum |
| Weight | 202g |
| Drive Position | Built-in |
| Is the Power Adjustable | PWM can be adjusted |
| Drive Protection | Surge Protection, Overvoltage Protection |
| Input Power | approx. 12V2A, about20W (without fan power) |
| Output Optical Power | 5.5W |
| Line Length | 300mm |
| Control Line Installation Method | Pluggable |
| Fan Size | 30*10mm |
| Fan Speed | 15000 rpm |
| Controllable Temperature | Less than 60 degrees Celsius |
| PWM | 20KHz / 3.3V |
| Temperature Sensor | Yes |
| Focus Range | 40mm-60mm ( 50mm is best) |
| Focus Diameter | 0.05mm |
| Best Focal Length | 10mm from the light exit |
| Interface Specification | 4pin PH2.0 (red: 12V, black: GND, yellow: PWM, green: temperature signal) |
| Main Applications | Paper cutting, Wood cutting(<5mm), Depth Engraving, g-code drawing... |
| Note | 1. It is heavier, not suitable for engraving, only suitable for cutting. 2. Please apply this module under the premise of safety protection! 3. Recommended application machine: NEJE Master. 4. NEJE Master comes standard with 12V2A charger. If you want to upgrade your old machine, you need to prepare another 12V3A power supply. |
Package Included:
1 x Module
2 x Screws
2 x Gaskets
1 x Control Line
More Details:
Shipping Time
After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.
The timeline of the whole shipping process is shown below:
The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.
Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.
Shipping Rates
You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:
You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:
| Shipping Method | Shipping Rates | Shipping Times |
| Flat Shipping (Promotion) | $10 | About 5-30 Working Days to Worldwide (Only include Monday to Saturday ) |
Standard Express（0.5KG starting price listed） | Based On Weights | About 5-15 Working Days to Worldwide (Only include Monday to Saturday ) |
Priority Express （0.5KG starting price listed） | Based On Weights | About 3-7 Working Days to Worldwide (Only include Monday to Saturday ) |
In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.
If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!
