K-5202 80g High Temperature Resistant Thermal Grease Heat Sink Paste for LED Light CPU PCB COB Chips Special Glue
- Stock: In Stock
- Model: EB002832
- SKU: EB002832
Features:
White thixotropic elastomer
One-part,room cure
Good cold and hot tolerance
Thermal conductivity 1.2
K-5202 is a reinforced thermally conductive silicone elastomer with great adhesion, insulation and dissipation
One part, room cure, packing in soft metal tube
Excellent in cold and high alternating resistance (-60~ 280℃)
No peeling and good disassemble after long time usage
The elastomer with high bonding strength , the shear strength is 30kg/cm3
Specification:
Property Name: K-5202
Appearance: White
Viscosity (cp): Thixotropic elastomer
Density(g/cm3): 2.0~3.0
Initial Curing Time(25c, min): <=10
Cured Mechanical Properties Tensile Strength (Mpa): >=2.5
Elongation At Break (%): >=100
Shear Strength (Mpa): >=1.5
Hardness(shore A): 50~65
Working Temp ( c): -60~280
Electrical Properties Dielectric Strength(kv/mm): >=18
Permittivity (@60Hz): 2.8
Volume Resistivity (?.cm): 1×1015
Coefficient of Thermal Conductivity(w/m.k): 1.6
Application:
Fill, bond, and seal in electronics
The gap between CPU and radiators
The gap between thyristor control modules and radiator
The filling of high-power electronics modules and radiators etc.
Purpose:
The main application is to replace thermal conductive silicone (cream) for CPU and radiator, thyristor module and intelligent control radiator, high-power electric filling adhesive between the module and the radiator. After using this glue, can get rid of the traditional CARDS and screw connection way, the result is more reliable to fill the cooling, simpler process and more economic cost.
How to Use: Clean the un-bonded or uncoated surfaces by removing the rust, ash, and oil, etc.
Application: Pierce the opening with the tip of the cap. Fix the nozzle, and coat the clean surface evenly with the adhesives, then bond the two surfaces.
Curing Condition:
The curing progress is from outer surface into inner surface.
The elastomer get cure with the depth of 2~4mm in 24 hours (at room temperature, 55% moisture). if the bonded parts is too deep (especially the parts not easy to contact with air) or the temperature is too low, the full curing time will be extend.
Advise user preparing enough time to let elastomer get full cure in order to keep the properties stably.
Packing Included:
1 x Kafuter K-5202 80g Thermal Grease
Detail Pictures:
Shipping Time
After you successfully placed an order at RenhotecIC.com, you will receive a confirmation email with your invoice. Once your order is shipped, you will be emailed with the tracking information of your package. Also, you can choose your preferred shipping method during the checkout process. Kindly advise: please select DHL/FedEx if you need our product urgently.
The timeline of the whole shipping process is shown below:
The total delivery time is calculated from the time your order is successfully placed to the time received. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s), includes preparing your items, performing quality inspections, and packaging for shipment. Normally, the processing time is 1-3 days (Only include Monday to Saturday ) after getting your order.
Shipping time: The time for your item(s) to travel from our warehouse to your destination. The shipping time depends on the shipping method you chose. Please refer to the shipping rate section for details.
Shipping Rates
You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:
You could choose the shipping method based on your preference during checkout, different shipping methods will apply different rates and shipping times. Please check the following chart for detail:
| Shipping Method | Shipping Rates | Shipping Times |
| Flat Shipping (Promotion) | $10 | About 5-30 Working Days to Worldwide (Only include Monday to Saturday ) |
Standard Express（0.5KG starting price listed） | Based On Weights | About 5-15 Working Days to Worldwide (Only include Monday to Saturday ) |
Priority Express （0.5KG starting price listed） | Based On Weights | About 3-7 Working Days to Worldwide (Only include Monday to Saturday ) |
In addition, the transit time depends on where you're located, the shipping method you choose, and where your package comes from. We will keep you informed of any problems here to help you get your order as soon as possible.
If you want to know more information, please contact the customer service by contact form or sales@renhotecic.com. We will settle your problem as soon as possible. Enjoy shopping!
