As a procurement worker, how much do you know about cable distributors? Do you know what its application is? Hope this article can answer and help you.

　　Cable splitters are used to connecting multiple TVs, computer monitors, or other devices to a single signal source. When the signal passes through the splitter, its signal will be separated and weakened, but the data will not change. Since the signal is evenly distributed, the signal will become weaker for larger splitters. The signal strength of the 3-way splitter is 1/3 of the normal strength, even if you do not use each port on the splitter, the signal strength is the same. After turning on the power of the cable splitter, even if not all ports are in use, the signal will be distributed among each port of the device. For example, if you have a three-way splitter and only use two ports, then each of the two lines still has only 1/3 of the normal signal strength.


　　1.The coaxial cable splitters is used to connect multiple TVs to one coaxial cable. These splitters are made of F-type female holes, the same type of screw-on connection seen on the back of most TVs.

　　The power supply is directly supplied through the coaxial cable; the coaxial cable splitter does not need to be plugged into a wall socket. Any port on the coaxial cable splitter that transmits power will be marked as "passive port power". Some coaxial cable splitters can transmit power through each port, while other coaxial cable splitters have only one passive port. If you need to supply power through multiple ports, be sure to choose a coaxial cable splitter that can do so.


　　2.Headphone splitters for 3.5 mm cables are very common, and there are mainly two types, from 1 male to 2 female, or from 2 female to 1 male. 1 to 2 females are to insert two sets of earphones into one device. For example, in our lives, sometimes there is only one jack on computers and TVs. At this point, you can insert a male plug and convert it into two jacks.


　　3.HDMI is one of the most common splitters today. It is a digital video/audio interface technology. It is a dedicated digital interface suitable for image transmission. It can transmit audio and image signals at the same time. The maximum data transmission speed is 2.25GB/s. At the same time, there is no need to perform digital/analog or analog/digital conversion before signal transmission. Compared with DVI, the volume of the HDMI interface is smaller, and the optimal cable length of HDMI/DVI should not exceed 8 meters. As long as one HDMI cable can replace up to 13 analog transmission lines, it can effectively solve the problem of messy and tangled connections behind the home entertainment system.


　　4.A network splitters is to divide a signal network  into several network signals, and the signal level of each channel is equal. There will be a loss of signal strength when using a splitter. 2 is allocated to 4dB, 3 is allocated to 6dB, and 4 is allocated to 8dB. Although the signal is allocated, multiple signals can be transmitted back and forth in less than one second.


　　Contacting us for more information about cable Splitters, We are happy to explain to you in detail with the required quotation. We are happy to answer you!