Relay Module
>
>>>Manual: Click here to open..
$10.00
Ex Tax:$10.00
>
Description:
Maximum load: AC 250V/10A, DC 30V/10A.
The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA.
Working voltage is 24V.
Each channel of the module can be set up by high jumper or low level trigger.
..
$10.99
Ex Tax:$10.99
Description: Maximum load: AC 250V/10A, DC 30V/10A. The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA. Working voltage is 24V. Each channel of the module can be set up by high jumper or low level trigger. Fault tolerant design, even if the co..
$9.99
Ex Tax:$9.99
>
Feature:
6 relay output module, relay output contact 250A 10A. Input IN1, IN2, IN3, IN4, IN5, IN6 signal line low level effective.
VCC, GND power input, relay can be supplied separately to relay power input terminal JD-VCC.
Description :
1. Maximum load on normally o..
$13.99
Ex Tax:$13.99
>
>>>Manual: Click here to open..
$12.99
Ex Tax:$12.99
Description: Maximum load: AC 250V/10A, DC 30V/10A. The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA. Working voltage is 5V. Each channel of the module can be set up by high jumper or low level trigger. Fault tolerant design, ev..
$12.99
Ex Tax:$12.99
Feature: 6 relay output module, relay output contact 250A 10A. Input IN1, IN2, IN3, IN4, IN5, IN6 signal line low level effective. VCC, GND power input, relay can be supplied separately to relay power input terminal JD-VCC. Description : 1. Maximum load on normally open pin: A..
$11.99
Ex Tax:$11.99
Specification: Input Power Supply: 24V DC Load Voltage: AC240V 2AMaximum operating current: 79.6mATrigger mode: high level / low levelInput control signal voltage:(0-2.5V low state relay OFF)(3.3-5V state high relay ON)Blue KF301 terminal connection control line is more convenient.Module interface:..
$13.99
Ex Tax:$13.99
>
Feature:
Jog, self-locking and interlock, three modes can be switched at will
The six-channel multi-function RF receiver controller sends an open signal and a close signal 6 relay.
Applications include smart homes, electronic doors, windows, lifting equipment, switches, lifts, i..
$29.99
Ex Tax:$29.99
6-24V 8CH Channel RS485 Module Modbus RTU Protocol AT Command Multi-function Relay PLC Control Board
Manual and other files: Click here to open Features: Operating voltage: DC 6-24V (12V version)Working current: 10-15MAAT command and MODBUS command two command control modesThe maximum delay is 9999 seconds under the AT command, and the maximum delay is 255 seconds under the MODBUS command.The AT c..
$10.99
Ex Tax:$10.99
Control Channels: 1 Channel Voltage: DC 12V,DC 24V Precise details>> Precise details: Features: 1. Trigger Signal Source: High Level Trigger (3.0 V-24 V), signal ground and system ground ..
$5.99
Ex Tax:$5.99
>
The main purpose:
The weak current of the Raspberry Pi IO output can control the switching of high current through this product, and is often used in smart homes such as smart homes. Combined with the network function of the Raspberry Pi, remote control of home appliances can be rea..
$25.99
Ex Tax:$25.99