Module Board
JK01-30A 12V 0-60Min Trigger Delay Optocoupler Isolation Multi-function Relay Module 30A Timer Relay
Features: - The delay length setting requires a soldering iron to be short-circuited according to the time value in the table. - When all the short contacts are disconnected, the trigger is bistable, that is, the trigger is triggered, and then the trigger is disconnected. - The control signal is t..
$7.99
Ex Tax:$7.99
Control Channels: 1 Channel Voltage: DC 12V Precise details>> Precise details: Features: - Function: The module is powered on, and after a delay, the relay closes and turns on the applian..
$4.99
Ex Tax:$4.99
Features: - Function: After connecting to 220V, the output is off. When triggered, it outputs 220V. After the arrival time, the output is turned off. - Direct 220V output. The external power cord, load, and button work. Easy to use. - High-quality original Songle relay for switching currents up to..
$7.99
Ex Tax:$7.99
>
>>>Manual: Click here to open..
$6.99
Ex Tax:$6.99
>
Features:
- Function: After the button is triggered, the delay starts. After the time is reached, the relay is pulled for about 0.5 seconds and then released.
- The delay time is adjustable from 0.1 second to 100 seconds. The adjustable resistance on the board is clockwise for long..
$7.99
Ex Tax:$7.99
Specifications: Voltage: 5V DC Quiescent current: 8mA Operating current: 95mA Trigger: passive switch trigger, response time is 0.03 seconds (the trigger terminal can not access the active signal) Minimum on-off time: 0.2 seconds Load capacity: 10A Output form: normally open + normally closed Size..
$7.99
Ex Tax:$7.99
Usage: This module starts work after triggering. If you need to set the power to start timing, then you can connect the two trigger lines directly. "Trigger" is simply a touch of two lines. It can be a short touch or a long time. Timing starts when you touch each other. K: Switching signal trigg..
$8.99
Ex Tax:$8.99
Voltage: DC3-5V Precise details>> Precise details: Jog Type Touch Sensor Module Capacitive Touch Switch Module For Description: This is jog type capacitive touch switch sensor module based on a touch..
$5.99
Ex Tax:$5.99
>
Instruction: Click here to open Features: X, Y axis output is two potentiometers, can read the twist angle through AD conversion.
Press the rocker downward, you can move a touch switch, for digital output, has been pulled up.
The original OMRON button has long l..
$13.99
Ex Tax:$13.99
Description: Joystick HAT is one of the HAT module that is specifically designed for M5StickC. We have used a STM32F030F4 microprocessor inside to implement I2C communication with M5StickC. This mini-volume joystick module supports full angular movement and center press, and outputs angular data as ..
$12.99
Ex Tax:$12.99
>
Description:
JOYSTICK, we have two types of JOYSTICKs one is build 0n a panle compatible with FACES Kit, this is the M5Unit version of JOYSTICK JOYSTICK is very similar to the 'analog' joystick on PS2 (Play Stati0n 2) controllers. The X and Y axes are two 10k potentiometers which..
$7.99
Ex Tax:$7.99
>
Description:
JOYSTICK is a control column module. A joystick is an input device consisting of a stick that pivots on a base and reports its angle or direction to the device it is controlling. Same as ENCODER, it is compatible with FACE Kit. You can have it replace the keycoard panel..
$12.99
Ex Tax:$12.99