Driver Module
>
Parameters:
Size: 18.5 x 16 mm
Input voltage: 3-10V
Single H bridge output current: 1.5A, can drive 2 dc deceleration motors.
Built-in overcurrent protection, short circuit protection, undervoltage latching and overheating protection. Sleep mode with low power consumption.
..
$8.99
Ex Tax:$8.99
>
Specicications:
Input voltage: 3 - 10V
Size: 18.5*16mm
Single H bridge output current: 1.5A, can drive 2 DC geared motors.
Built-in overcurrent protection, short circuit protection, undervoltage lockout and overtemperature protection. With low power sleep mode.
Uses: It ca..
$12.99
Ex Tax:$12.99
>
Features:
1.Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motors
2.Built-in TSD, without worrying about motor stall
3.Ultra-small size, suitable for assembly and carSpecification:
1.Module supply voltage: DC 2V-10V
2.Signal input voltage: DC 1.8-7V
3.Single ..
$10.99
Ex Tax:$10.99
>
Description:
1. DC Motor Speed Controller,The full name of pulse width modulation is Pulse Width Modulator.Abbreviation PWM.DC motor governor is a device for adjusting the speed of a DC motor.
2. DC motor speed regulation, industrial conveyor belt speed regulation, lighting and lighting me..
$24.99
Ex Tax:$24.99
>
Specifications:
Current: 700mA
Voltage input: 12V DC
Voltage output: 1.7-12V DC
Size: 38MM * 38MM
Potential: good night vision effect; rigorous design, stable performance and strong anti-interference.
Use: Suitable for all kinds of infrared lamp board drive, suitable for 1-6 infrared lamp
F..
$11.99
Ex Tax:$11.99
>
Specifications:
1. Driver chip: L298N double H bridge DC motor driver chip
2. Drive part terminal power supply range Vs: +5V to +35V (If you need to take power inside the board, the power supply range is Vs: +7V ~ +35V)
3. Drive part of the peak current: 2A
..
$23.59
Ex Tax:$23.59
>
5Pcs L298N Dual H-Bridge Stepper Motor Driver Board For Description:Double H bridge drive Chip: L298N (ST NEW) Logical voltage: 5V Drive voltage: 5V-35V Logical current: 0mA-36mA Drive current: 2A (MAX single bridge) Storage temperature: -20 to +135 Max power: 25W Weight: 30g Size: 43..
$15.99
Ex Tax:$15.99
>
Description:
There are two L9110S motor control chip onboard
This module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motorFeature:
Work under low static current
Power supply voltage: DC 2.5V - 12V
Each channel has 800mA continuous current output
Low saturation ..
$11.99
Ex Tax:$11.99
>
Introduction:
Two the L9110S motor control chip Onboard
The module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor
The module input voltage: 2.5-12V
The 800mA continuous current output capability per channel
Feature:
1. Low static work..
$9.99
Ex Tax:$9.99
>
Specifications:
Working voltage : DC 2.8-6V
Output Current: 31-1500mA
Maximum output power: 9W
Can drive 1-16pcs 2.8-6V LEDs (maximum current does not exceed 1.5A)
Perfect for 3V 3.3V 3.7V 5V 6V LED Driver)
Current regulation: 1 through adjustable resist..
$14.99
Ex Tax:$14.99
>
Specifications:
Input voltage: AC110/220V
Output voltage: DC12-17V
Output current: 200-300mA(adjustable)
Product size: 55*29*21mm
Working temperature: Ta: 50 TC: 75
Efficiency: ≥90%
Power factor: 0.9
Product application: spotlight PAR light / bulb light / candl..
$10.99
Ex Tax:$10.99
>
Feature:
Working voltage: DC5V-36V
Trigger signal source: digital high level (DC3.3V-20V), can be connected to the microcontroller IO port, PLC interface, DC power supply, etc., can connect PWM signal, support signal frequency 0-20khz
Output: DC5V-36V, continuous current at room..
$7.99
Ex Tax:$7.99