Driver Module
>
Feature:
Working voltage: DC5V-36V
Trigger signal source: digital high level (DC3.3V-20V), can be connected to the microcontroller IO port, PLC interface, DC power supply, etc., can connect PWM signal, support signal frequency 0-20khz
Output: DC5V-36V, continuous current at room..
$7.99
Ex Tax:$7.99
>
Features:
I2C interface
Power supply voltage: VM=15V max
Output current: Iout=1.2A(average) / 3.2A (peak)
Standby control to save power
CW/CCW/short brake/stop motor control modesPins Description:
VM: Motor power supply + (Max 15Vdc)
GND: Motor power supply -
A1 A2: Motor A
B1 B2: Motor B
S..
$18.99
Ex Tax:$18.99
>
Features:
1. As a square wave signal generator,generates a square wave signal used for experimental development.
2. Used to drive a stepper motor for generating a square wave drive signal.
3. Generate adjustable pulse for MCU.
4. Generate adjustable pulse,to control circuitry associated.
5. Si..
$8.99
Ex Tax:$8.99
>
Features: This board/chip uses I2C 7-bit address between 0x60-0x80, selectable with jumpers Terminal block for power input (or you can use the 0.1" breakouts on the side) Reverse polarity protection on the terminal block input Green power-good LED 3 pin connectors in groups of 4 so y..
$19.99
Ex Tax:$19.99
>
Description:
1. onboard TJA1050 CAN controller interface chip
2. chip commonly used pin has led, convenient connection to use
3. pin 5 v to power supply
4. PCB board size: 22 (mm) x11.5 (mm)
Package included:
5 x TJA1050 CAN Controller Interface Module..
$9.99
Ex Tax:$9.99
>
Features:
A, B, C, D LEDs indicate the shape of the four-phase stepper motor
It is equipped with a standard interface for stepper motors and can be inserted directly during use.
Dimensions: 31 × 35mm
Package Included:
5 x ULN2003 Driver Board..
$6.99
Ex Tax:$6.99
>
Specifications:ULN2003A motor driver chipChip all the pins already leads for easy connection to use5-12V power supply4-way signal indicatorXH-5P socket, can be connected directly 28BYJ-48 Model stepper motorPCB board size: 40.5 x 21.3 mmPackage includes:5 x ULN2003 Stepper Motor Driver Board..
$8.99
Ex Tax:$8.99
>
Feature:
Rated Voltage: DC5V-12V
4-phase
Reduction Ratio: 1/64
Step Torque Angle: 5.625°/64
DC Resistance: 200ω±7% (25°)
Insulation Resistance: >10Mω (500V)
Insulation Grade: A
No-load Pull in Frequency: >600Hz
No-load Pull out Frequency: >1000Hz
Pull in T..
$6.99
Ex Tax:$6.99
>
Description:
ULN2003 is a high voltage and high current Darlington transistor array products with high current gain, high operating voltage, wide temperature range, with strong load capacity and other characteristics, adapted to the requirements of various types of the high-speed hi..
$7.99
Ex Tax:$7.99
Voltage: 5V(USB)
Precise details>>
Precise details:
Update information: The capacitor is replaced with a chip capacitor.
Feature:
DC5V power supply can be used.
Package includes:
5 x B..
$14.99
Ex Tax:$14.99
>
Feature:
Product Name: Water Level Controller
Product model: XH-M203
Working voltage: AC/DC 12V
Output capacity: 10A
Output type: relay output
Control type: fully automatic
Product size: 60 x 40 x 18mm
Mounting hole: M3 screw holePackage includes:
5 x Water Level Contr..
$24.99
Ex Tax:$24.99
>
Description:
1. 5V 1A micro usb
2. 7 colors(has RGB led.bottom light color, not the number light color)
3. Use good timing IC
4. Dimension: 187x48mm
5. Function: 24hours Display model, every 5mins refresh display, No alarm.
6. Package Contents :1x circuit board, No Tubes
7. The version is c..
$39.99
Ex Tax:$39.99