Driver Module
>
Specification:
Input Vol:: 10.8-28V
Output Vol:: 15-88v
size: 8.5x4.5CM
1.VCC: power supply and voltage positive, circuit voltage (The voltage is usually 12V or 24V)
2.ON / OFF, ON, EN, ON_BL etc: switch foot, foot switch signal (The voltage range is between 2.5V-5V..
$4.99
Ex Tax:$4.99
Specifications:
Input Power: 10-28V DC Input
Output voltage: 88V automatically adapt to the following (the minimum limit for the input voltage, no buck)
Output current: default 80mA, by shorting R22 R21 R18 R15 R24 resistance, can increase the current, each resistance 80..
$9.99
Ex Tax:$9.99
>
Description:
The LED Strip Vol must be between 60V-165V.
shall not exceed the maximum working voltage of 165V.If the voltage exceeds ,the screen will appear dark or flashing lamp and so on. This product is only constant, not constant voltage, the voltage will automatically adjus..
$6.99
Ex Tax:$6.99
>
Specifications:
Used for : 26inch-50inch LED TV
Input Voltage :12-24V DC
Output Voltage :35-165V DC
Output current: 100mA-500mA (can set)
Size: 100x70mm
Package Included:
1 x 26inch-50inch TV Backlight Driver Board
..
$8.41
Ex Tax:$8.41
Voltage: 12V
Precise details>>
Precise details:
Description:
This DC-AC Inverter was developed for 1CCFL lamps of LCD back lighting system.High performance low consumption special operati..
$8.99
Ex Tax:$8.99
>
Feature:
1. Applicable to all versions of mach3 software;
2. The power of control card: voltage 12-24VDC, current more than 500MA.
3. Support for CNC controlled 5-Axis can connect five stepper motor drivers or servo drivers.
4. Add the enable signal interface, which can be us..
$61.99
Ex Tax:$61.99
>
Features:1.Model:JYQD-6.4B
2.Name:Brushless Motor Driver Board
3.Soft commutation function
4.Operating instructions
5.Over-current protection
6.Anti-reverse protectionSpecifications:1.Operating voltage:DC 7.5V-18V(12DC±20%)
2.Operating Current:≤3A
3.Speed Voltage:0.25V-5V
4.Speed ran..
$16.99
Ex Tax:$16.99
Specification:
Operating voltage: DC 12V-36V
Operating Current: <=15A
Driver Power: <=500W
Speed Voltage: 0.1V-5V
Operating Temperature: -40~85°C
Humidity: 90%RH
Stall protection: Yes
Enable Control: Yes
Over-current protection: ..
$12.99
Ex Tax:$12.99
>
Specifications:
Drive plate type: JYQD_V6.3E1
Voltage range: 12V-36V
Peak current: 20A
Drive power: ≤ 500W (related working voltage)
Size: 63 x 43 x 17mm
Speed control function: voltage speed regulationPackage included:
1 x DC 12V-36V 500W High Power Brushless Motor ..
$19.99
Ex Tax:$19.99
>
Specifications:
Rated voltage: DC 3V~36V
Rated current: 15A
Peak current: 30A
Size: 108 x 58mm
Motor forward: DIR = 1 PWM = PWM
Motor reverse: DIR = 0 PWM = PWM
Parking brake: DIR = X PWM = 0 (X is any state)
Connnection: POWER connects with power positive; GND con..
$16.99
Ex Tax:$16.99
Voltage: DC5V
Precise details>>
Precise details:
Description:
This module is a motor control module which can be used to control ordinary DC motor, smart car motor, etc. Compact size, ligh..
$23.99
Ex Tax:$23.99
>
Introduction:EG8010 is a digital, function very well bring their own dead-time control of pure sine wave inverter generator chip, used in two-stage DC-DC-AC power conversion structure or single-stage DC-AC power frequency transformer Boost architecture, an external 12MHz crystal os..
$9.99
Ex Tax:$9.99