Driver Module
Specifications:
Main Controller IC : IS917
USB type: USB3.0
PCB size:14*33mm(without the USB port size)
Support IC: BGA152/132/136 TOP48 (two solder chips,every chips need 2CE.But if you weld one chip in PCB,MAX 4CE)
Usage:（USB3.0 interface High speed）
NAND flash R/W Strick..
$37.55
Ex Tax:$37.55
10pcs CA-255 10-42Inch LED TV Constant Current Board Universal Inverte LED TV Backlight Driver Board
>
Specification:
Input Vol:: 10.8-28V
Output Vol:: 15-88v
size: 8.5x4.5CM
1.VCC: power supply and voltage positive, circuit voltage (The voltage is usually 12V or 24V)
2.ON / OFF, ON, EN, ON_BL etc: switch foot, foot switch signal (The voltage range is between 2.5V-5V..
$24.00
Ex Tax:$24.00
>
10Pcs DC 5V 4 Phase 5 Wire Stepper Motor With ULN2003 Driver BoardDescription:
This is 28YBJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board
5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct plug, e..
$26.99
Ex Tax:$26.99
>
Parameters:
Size: 18.5 x 16 mm
Input voltage: 3-10V
Single H bridge output current: 1.5A, can drive 2 dc deceleration motors.
Built-in overcurrent protection, short circuit protection, undervoltage latching and overheating protection. Sleep mode with low power consumption.
..
$12.99
Ex Tax:$12.99
>
Specicications:
Input voltage: 3 - 10V
Size: 18.5*16mm
Single H bridge output current: 1.5A, can drive 2 DC geared motors.
Built-in overcurrent protection, short circuit protection, undervoltage lockout and overtemperature protection. With low power sleep mode.
Uses: It ..
$19.99
Ex Tax:$19.99
>
Features:
1.Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motors
2.Built-in TSD, without worrying about motor stall
3.Ultra-small size, suitable for assembly and carSpecification:
1.Module supply voltage: DC 2V-10V
2.Signal input voltage: DC 1.8-7V
3.Single ..
$15.99
Ex Tax:$15.99
>
Description:
1. DC Motor Speed Controller,The full name of pulse width modulation is Pulse Width Modulator.Abbreviation PWM.DC motor governor is a device for adjusting the speed of a DC motor.
2. DC motor speed regulation, industrial conveyor belt speed regulation, lighting and lighting me..
$42.99
Ex Tax:$42.99
>
Specifications:
Current: 700mA
Voltage input: 12V DC
Voltage output: 1.7-12V DC
Size: 38MM * 38MM
Potential: good night vision effect; rigorous design, stable performance and strong anti-interference.
Use: Suitable for all kinds of infrared lamp board drive, suitable for 1-6 infrared lamp
F..
$17.99
Ex Tax:$17.99
>
Description:
There are two L9110S motor control chip onboard
This module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motorFeature:
Work under low static current
Power supply voltage: DC 2.5V - 12V
Each channel has 800mA continuous current output
Low saturation pr..
$14.99
Ex Tax:$14.99
>
Introduction:
Two the L9110S motor control chip Onboard
The module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor
The module input voltage: 2.5-12V
The 800mA continuous current output capability per channel
Feature:
1. Low static work..
$13.99
Ex Tax:$13.99
>
Specifications:
Working voltage : DC 2.8-6V
Output Current: 31-1500mA
Maximum output power: 9W
Can drive 1-16pcs 2.8-6V LEDs (maximum current does not exceed 1.5A)
Perfect for 3V 3.3V 3.7V 5V 6V LED Driver)
Current regulation: 1 through adjustable resist..
$22.99
Ex Tax:$22.99
>
Specifications:
Input voltage: AC110/220V
Output voltage: DC12-17V
Output current: 200-300mA(adjustable)
Product size: 55*29*21mm
Working temperature: Ta: 50 TC: 75
Efficiency: ≥90%
Power factor: 0.9
Product application: spotlight PAR light / bulb light / candl..
$14.99
Ex Tax:$14.99