Driver Module
>
Description:
Miniature simple peristaltic pump
Feature:
Applicable power supply: DC 6V
Working environment: temperature 0-40℃, relative humidity < 80%
Flow direction of medium: the flow direction of peristaltic pump depends on the positive and negative stages of power supply. The terminals ..
$16.99
Ex Tax:$16.99
>
Introduce:
1. Input: 11V~13V, 1A, DC power (5.5-2.1)
2. Using STM8S005 as the main control, built-in procedures, welding light pipe can be used directly.
3. Support seven clock color display (containing RGB lamp).
4. The use of imported high-precision clock chip, a year less than 1 minutes..
$38.31
Ex Tax:$38.31
>
Specifications:
Input voltage: AC90-265V
Output voltage: DC45-82V
Output current: 280-300mA(adjustable)
Product size: 50*20*15mm
Working temperature: Ta: 50 TC: 75
Efficiency: ≥87%
Power factor: 0.6
Product application: spotlight PAR light / bulb light / candle l..
$7.99
Ex Tax:$7.99
>
Overview: PCA9685 module could control 16 road by PWM, every road programmable output for shut, open. Through the I2C communication.The function and characteristics: ● Working voltage: 2.3-5.5V ● Communication protocol: I2C ● Cannel number: 16 ● Resolution ratio: 12 bit ● V+ In..
$15.99
Ex Tax:$15.99
>
Specifications:
Input voltage: AC180-265V
Output voltage: DC 54-80V
Output current: 280-300mA(adjustable)
Product size: 120*42*27mm
Working temperature: Ta: 50 TC: 75
Efficiency: ≥86%
Power factor: 0.95
Product application: spotlight PAR light / bulb light / cand..
$10.99
Ex Tax:$10.99
>
1#: 1x6P
2#: 2x3P
What is it?
It is a bootloader flash tool for Ardui o products. If you do not understand what is bootloader I suggest you have a look this:
Bootloader Development: https://www.arduino.cc/en/hacking/bootloader
Ardui o as ISP and Ardui o Bootloaders: https://www.arduino.cc/..
$35.63
Ex Tax:$35.63
>
Description:
2.5A power-enhanced motor drive module with silicone wire, pin header, terminal. The power supply voltage is 2V~10V, which can drive two DC motors or one 4-wire 2-phase stepping motor at the same time. It can realize the function of forward and reverse and speed regulatio..
$6.99
Ex Tax:$6.99
Specifications:
Main Controller IC : IS917
USB type: USB3.0
PCB size:14*33mm(without the USB port size)
Support IC: BGA152/132/136 TOP48 (two solder chips,every chips need 2CE.But if you weld one chip in PCB,MAX 4CE)
Usage:（USB3.0 interface High speed）
NAND flash R/W Strick..
$73.72
Ex Tax:$73.72
>
Specicications:
Input voltage: 3 - 10V
Size: 18.5*16mm
Single H bridge output current: 1.5A, can drive 2 DC geared motors.
Built-in overcurrent protection, short circuit protection, undervoltage lockout and overtemperature protection. With low power sleep mode.
Uses: It ca..
$34.99
Ex Tax:$34.99
>
Features:
1.Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motors
2.Built-in TSD, without worrying about motor stall
3.Ultra-small size, suitable for assembly and carSpecification:
1.Module supply voltage: DC 2V-10V
2.Signal input voltage: DC 1.8-7V
3.Single ..
$25.99
Ex Tax:$25.99
>
Description:
1. DC Motor Speed Controller,The full name of pulse width modulation is Pulse Width Modulator.Abbreviation PWM.DC motor governor is a device for adjusting the speed of a DC motor.
2. DC motor speed regulation, industrial conveyor belt speed regulation, lighting and lighting me..
$82.99
Ex Tax:$82.99
>
Introduction:
Two the L9110S motor control chip Onboard
The module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor
The module input voltage: 2.5-12V
The 800mA continuous current output capability per channel
Feature:
1. Low static work..
$22.99
Ex Tax:$22.99