Driver Module
>
2Pcs L298N Dual H-Bridge Stepper Motor Driver Board For Description:Double H bridge drive Chip: L298N (ST NEW) Logical voltage: 5V Drive voltage: 5V-35V Logical current: 0mA-36mA Drive current: 2A (MAX single bridge) Storage temperature: -20 to +135 Max power: 25W Weight: 30g Size: 43..
$9.44
Ex Tax:$9.44
>
Description:
There are two L9110S motor control chip onboard
This module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motorFeature:
Work under low static current
Power supply voltage: DC 2.5V - 12V
Each channel has 800mA continuous current output
Low saturation pr..
$7.99
Ex Tax:$7.99
Voltage: 5V(USB)
Precise details>>
Precise details:
Update information: The capacitor is replaced with a chip capacitor.
Feature:
DC5V power supply can be used.
Package includes:
2 x B..
$8.99
Ex Tax:$8.99
>
Description:
1: Model: YYMOS-1
2: Function introduction: PWM amplification
3: Input and output voltage: 3.3V~24V
4: Support frequency: 100KHZ or less
5: Output power: DC load within 10A can be controlled
6: Precision electronic products, positive and negative poles do not reverse, or the ant..
$7.99
Ex Tax:$7.99
>
Features:
- Operating voltage is 12V
- One of our FBTS is equivalent to more than 6-8 black and white FBTS.
- High voltage output 30000Vv, with overcurrent protection.
- Feed protection is lower than 8.5v to stop high voltage oscillation.
- Support full stop control signal.
- With working ..
$16.99
Ex Tax:$16.99
Specifications:
Main Controller IC : IS917
USB type: USB3.0
PCB size:14*33mm(without the USB port size)
Support IC: BGA152/132/136 TOP48 (two solder chips,every chips need 2CE.But if you weld one chip in PCB,MAX 4CE)
Usage:（USB3.0 interface High speed）
NAND flash R/W Strick..
$109.20
Ex Tax:$109.20
>
Specifications:
Current: 700mA
Voltage input: 12V DC
Voltage output: 1.7-12V DC
Size: 38MM * 38MM
Potential: good night vision effect; rigorous design, stable performance and strong anti-interference.
Use: Suitable for all kinds of infrared lamp board drive, suitable for 1-6 infrared lamp
F..
$42.99
Ex Tax:$42.99
>
Parameters:
Size: 18.5 x 16 mm
Input voltage: 3-10V
Single H bridge output current: 1.5A, can drive 2 deceleration motors.
Built-in overcurrent protection, short circuit protection, undervoltage latching and overheating protection. Sleep mode with low power consumption.
..
$26.99
Ex Tax:$26.99
>
Feature:
Rated Voltage: DC5V-12V
4-phase
Reduction Ratio: 1/64
Step Torque Angle: 5.625°/64
DC Resistance: 200ω±7% (25°)
Insulation Resistance: >10Mω (500V)
Insulation Grade: A
No-load Pull in Frequency: >600Hz
No-load Pull out Frequency: >1000Hz
Pull in T..
$21.99
Ex Tax:$21.99
>
Specifications:
Input :DC 5-35V
Output: 700mA ± 20mA
Drive 1-10 pcs 3W LED
Supports PWM dimming
High level turn off the output
Low level Open the output
LED buck mode to ensure the total total voltage difference is lower than the input supply voltage (2-3V) .
Ultr..
$9.99
Ex Tax:$9.99
>
Features:
Motor drive module comes with its own four HG7881 chip.
Can drive 4 DC motors, or two 4-wire 2-phase stepping motor.
Specifications:
Module supply voltage: 2.5-12V
Suitable for the motor range: motor operating voltage 2.5V-12V
0.8A maximum operating ..
$13.99
Ex Tax:$13.99
>
Specifications:
Input voltage: AC 85-265V
Output voltage: DC12-24V
Output current: 280-300mA(adjustable)
Product size: 20*18*12mm
Working temperature: Ta: 50 TC: 75
Efficiency: ≥87%
Power factor: 0.6
Product application: spotlight PAR light / bulb light / candle ..
$3.52
Ex Tax:$3.52